Core Moto wheels Improved replacement bearings for Carrozzeria wheels


SKU: B6XXXX Category: Tag:


New improved High quality sealed bearings for Core Moto USA / Carrozzeria Forged wheels.

IMPORTANT NOTE: Carrozzeria USA INC went out of business in October 2015, Core Moto USA took over in 2016. However due to the lack of historical technical data provided to us related to wheel dimensional changes before 2016, Core Moto USA Can not offer bearings based on make / model and year. Carrozzeria USA INC made many different model versions of each wheel, all with dimensional differences that drive the dimensions of the components used. Please read below on how to determine what bearings you will need for your older wheels.Returns are not accepted on this item.

Wheels produced in 2016 are supported, but may require contact with customer support.
Wheels produced after 2017 typically came with full diagrams showing and part numbering all replacement parts.

There are 2 ways to determine what bearings are needed for your wheels.

Option 1: Read the numbers on the seals of your current bearings. Typically these numbers are 4 digits and start with the number 6. Example:6006
Your Bearing may have other letter following the 4 digit number such as 2RS or RSR. No matter what letters follow the 4 digit number, our bearings will be a direct replacement so long as the 4 digit number is the same.

Option 2: Pull the bearings and provide measurements of the OD, ID and Thickness in MM.
6006 = OD 55mm – ID 30MM – T13
6204 = OD 47MM – ID 20MM – T14
6205 = OD 52MM – ID 25MM – T15
60/28 = OD 52MM – ID 28MM – T12
6005 = OD 47MM – ID 25MM – T12
Bearing dimensions listed above are rounded to the whole metric number.

For all Apex-6 wheel applications produced (Except Aprilia applications)
Bearings required
Rear: 3 units 6006
Front: 2 unit 6205

For Apex-6 RSV4/Touono
Bearings required
Rear: 3 units 6006
Front: 1 unit 6205 + 1 unit 60/28

V-Track wheel produced after 2017 with front wheel engraved with “FW13517” the same bearings as Apex-6.
If front wheel does not have FW3517 engraved on spoke, you must determine the bearings required by self inspection using our guide above.